Frequently Asked Questions (FAQs):4. Setting up the trunk to use SIP Outbound

VoIP: 4. Setting up the trunk to use SIP Outbound

• Log onto the Asterisk@home Management Portal (AMP)
• Select Setup.
• Select Tunks
• Select the add SIP Trunk.
• In the General Settings section. Enter your Outbound Caller ID and set maximum channels to 2. Note: The Outbound caller ID must be in UK number format and not international format. Also remember that if you have set the outbound caller ID in the extension then this will overide the Trunk Outbound Caller ID.
• If you have any Outgoing Dial Rules set them up in this section.
• In the Outgoing Settings section, set the "Trunk Name" to "SIP-Outbound" and set the "Peer Details" as follows:
  canreinvite=no
  context=from-pstn
  fromdomain=sip.freevirtualnumbers.co.uk
  host=sip.freevirtualnumbers.co.uk
  type=peer
  
• In the Incoming Settings section, leave all entries blank.
• In the Registration section, leave all entries blank and "Submit changes"